F-1300 Series Inline Turbine Flow Meters are available with fittings for pipe sizes of ¾" and 1". Inline flow meters provide an effective low cost option for measuring flow in small pipes.
factory calibration performed on every meter, within
±0.5% of reading accuracy at the calibrated (typical)
flow velocity and within ±2% of reading over a 50:1
flow range. ONICON's price vs. performance ratio is
Unequaled Operating Range
Provides repeatable flow data over a
175:1 turndown from 0.17 to 30 ft/s.
Patented non-magnetic impedance
sensing method, low mass non-metallic turbines with
sapphire jewel bearings and tungsten carbide shafts
provide a mechanical system that virtually does not
Integral Conditioned Outputs
Electronics enclosure includes integral
conditioned output circuitry for ease of installation.
Analog output models include both 4-20 mA and 0-10 VDC
signals. Isolated-analog, dry contact switch and
frequency outputs are also available.
ONICON F-1300 Series Inline Flow
Meters are designed to work in pipes of ¾" and 1" in
diameter. The F-1300 Series Flow Meters deliver highly
accurate flow data when installed with enough of a
straight pipe run to establish a fully developed flow
Typical uses for the F-1300 Series Meters
include: chilled water, hot water, condenser water,
domestic water, process cooling, steam condensate and