Turbine flow meters are suitable for pipe sizes ranging from 1¼" to 72" (1" for copper). The single turbine flow meters are ideal for smaller pipes and for larger pipes with enough straight pipe to provide fully conditioned flow.
ONICON F-1100 Series Insertion Flow Meters are designed to work in pipe sizes ranging from 1¼" to 72" in diameter (1" for copper). The F-1100 Series Turbine Flow Meters deliver highly accurate flow data when used in applications with a straight pipe run long enough to establish a fully developed flow profile.
Typical uses for the F-1100 series turbine flow meters include: chilled water, hot water, condenser water, domestic water, process cooling, steam condensate and brine.
NIST traceable factory calibration performed on every meter, within ±0.5% of reading accuracy at the calibrated (typical) flow velocity and within ±1-2% of reading over a 50:1 flow range. ONICON's price vs. performance is unmatched.
Unequaled Operating Range
Provides repeatable flow data over a 175:1 turndown from 0.17 to 30 ft/s.
Excellent Long-Term Reliability
Patented non-magnetic impedance sensing method, low mass non-metallic turbines with sapphire jewel bearings and tungsten carbide shafts provide a mechanical system that virtually does not wear.
Simplified Hot Tap Insertion Design
Integral hot tap design is standard for all insertion meters and allows installation and removal without system shutdown. Turbine flow meters can be removed and reinserted by hand without special tools.
Integral Conditioned Outputs
Electronics enclosure includes integral conditioned output circuitry for ease of installation. Analog output models include both 4-20 mA and 0-10 VDC signals. Isolated analog, dry contact switch and frequency outputs are also available.
|Turbine Flow Meters Application Guide||Guide Specifications|
|Turbine Flow Meter Manual|
|Model Number||Catalog Page Description|
Single Turbine Insertion Flow Meter with frequency output - provides a high-resolution frequency output for connection to an ONICON display or BTU meter.
Single Turbine Insertion Flow Meter with analog output - provides 4-20 mA & 0-10 V analog outputs.
Single Turbine Insertion Flow Meter with isolated analog output - provides isolated 4-20 mA & 0-10 V analog outputs.
Single Turbine Insertion Flow Meter with divided output - provides a conditioned binary / digital output signal corresponding to flow rate.
Single Turbine Insertion Flow Meter with scaled output - provides a scaled binary / digital output for flow totalization.
|Standard Kit for Welded Pipe - (INSTL1, INSTL5, INSTL18)|
|Hot Tap Kit for Welded Pipe - (INSTL2, INSTL6, INSTL31)|
|Standard Kit for 1 ¼" - 2 ½" Threaded Pipe - (INSTL7, INSTL8)|
|Standard Kit with Saddles - (INSTL10, INSTL11, INSTL12, INSTL13, INSTL14, INSTL15, INSTL16, INSTL17)|
|Hot Tap Kit with Saddles - (INSTL19, INSTL20, INSTL22, INSTL23, INSTL24, INSTL25, INSTL26, INSTL27, INSTL28, INSTL29, INSTL30, INSTL75)|
|Standard Kit for Copper Tube NSF Compliant - (INSTL3 1")|
|Standard Kit for Copper Tube NSF Compliant - (INSTL3 >1", INSTL4, INSTL9)|
|Hot Tap Kit for Stainless Steel Requiring Saddles - (INSTL74, INSTL76)|
|System-10 BTU Meter||ONICON's F-3500 Series Insertion Electromagnetic Flow Meter combined with the System-10 BTU Meter form and energy measurement system with unsurpassed accuracy and reliability.
System-10 BTU Meter Catalog Sheet
|D-100 Series||Totalizing flow display with network interface designed for use with any ONICON flow meter.
D-100 Series Catalog Sheet
|D-1200 Series||Display Module series for F-1100 Series Flow Meters.
D-1200 Series Catalog Sheet