D-100 Series Flow Meter Displays

The D-100 is a totalizing display module that provides a local indication of liquid, steam or gas flow rate and total data. The flexible design can be configured with an optional network interface to communicate data to a building control network. The versatile D-100 can also function as a network interface for two additional analog inputs and one additional totalizing pulse input. Some versions of the D-100 can also be configured with up to four optional analog outputs.

Typical Applications

  • HVAC chilled water, condenser water and hot water
  • Building water, steam and gas
  • Domestic water
  • Gray water and irrigation water
  • Saturated or superheated steam
  • Process monitoring

Works With Virtually Any Flow Meter

The standard flow input of the D-100 accepts active or passive 4-20 mA, active or passive pulse and contact closure flow signals.

Supports a Wide Variety of Communications Protocols

The D-100 can be provided with any of the following network interface options:
  • BACnet/IP
  • BACnet MS/TP
  • LONWORKS FTT10
  • MODBUS RTU-RS485
  • MODBUS RTU-TCP/IP
  • Johnson Controls Metasys N2
  • Siemens Apogee P1

Simple Installation and Commissioning

The D-100 is factory programmed and ready for use upon delivery. All programming functions are accessible via front panel display and keypad.

Suitable for Bi-directional Applications

The D-100 accumulates separate totals for flow in each direction. The totals may be read locally on the display or remotely via an optional network interface.

Catalog Sheets

Manuals

Archive

See selected flow meter order forms.