Chilled Water • Hot Water • Domestic Water • Steam • Natural Gas

Home >> Products >> Thermal Mass Flow Meters >> F-5500/F-5400 Series Thermal Mass Flow Meter

Products - Thermal Mass Flow Meter (Gas)
________________________________________
F-5500/F-5400 Series

New at ONICON

F-5000 Series Thermal Mass Flow Meters

F-5000 Series Thermal Mass Flow Meters

F-5500/F-5400 Series Thermal Mass Flow Meters
F-5500 Thermal Mass Flow Meters provide direct standard volumetric flow measurement of gases without the need for temperature and pressure compensation. Both inline and insertion versions of the flow meter are available. The insertion design allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow. Inline meters are ideal for pipes less than 1½" in diameter. The low maintenance design is provided ready-to-use without the need for field programming.

The F-5500 flow meter includes a bright, easy-to-read user interface/display that provides rate and total data. The standard version of the meter is provided with a 4-20 mA analog output and an RS485 interface that is field configurable for BACnet® MS/TP or Modbus® RTU. A second output signal configuration is available that includes a 4-20 mA output for flow rate and a scaled pulse output for totalization or alarm indication.

The F-5400 is a blind (no display) version of the meter that is available with an analog 4-20 mA output for flow rate and a scaled pulse output for totalization.

F-5500/F5400 Gas Flow Meters Typical Applications
F-5000 series thermal mass flow meters are ideal for natural gas, compressed air and other clean, dry gases.

Standard Features:

Highly Accurate
Proprietary digital control sensing circuitry is very stable and yet responsive to changes in flow. This design allows for accurate flow measurement over a very wide operating range (over 1000:1 for the inline version). It also makes the meter ideal for measuring low flow rates.

Each meter is individually calibrated and is accurate to within ± 1.0% of reading for standard natural gas applications.

Field Validation of Calibration
The F-5500 internal diagnostic functions include a zero flow calibration check. This fast, easy to perform test allows for field validation of the factory zero flow calibration. The utility software provided with the meter allows you to print a certificate validating the results.

Ideal for Retrofit Installations
The insertion style meter can be hot tapped into existing systems without interrupting gas service.

Low Maintenance
No moving parts and durable construction provide years of trouble-free service.

Simple Installation and Commissioning
Each thermal mass flow meter is factory programmed for the specific application and ready for use upon delivery.

Guide Specifications

Thermal Mass Flow Meters Catalog Sheets  
F-5500 Thermal Mass Flow Meter Catalog Sheet PDF
F-5400 Thermal Mass Flow Meter Catalog Sheet PDF
Thermal Mass Flow Meters Installation Guides  
F-5500 Thermal Mass Flow Meter Manual PDF
F-5400 Thermal Mass Flow Meter Manual PDF

Installation Kits Instructions
Low Pressure (60 PSI, 125°F max) Hot Tap Installation Kit for Welded Pipe - (INSTL94) PDF
F-5500/F-5400 Flow Meter Order Form Excel
Model Number Catalog Page Description  
D-100 Series Totalizing flow display with network interface designed for use with any ONICON flow meter. D-100 Series Catalog Sheet D-100
Software Downloads
F-5000 View Software Download EXE File
F-5000 View Software Manual PDF
11451 Belcher Road South, Largo, FL 33773 • USA
Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699

 

Applications | Products | Networking | Downloads | Quote Request | Contact Us | Support
About ONICON | Find a Representative | Careers | Home